Face recognition terminal

Last update: 20.05.2024

NB!: events only upon detection of persons from special "PACS" list can be retrieved via face terminal within the service. It's impossible to link other named lists to face terminal, it's also impossible to get any events upon detections of "unknown" persons as this data is not stored within terminal system in any way. 



5ea46096c6fb0893f9d7b72f745aa74f.png
ace5c25c39070dec016f0f9518659a9a.png

                                                 DS-K1T331 / DS-K1T33W

                                                   DS-K1T341AM / DS-K1T341AMF


How to connect a Face recognition terminal to your personal account?


You can connect a Face recognition terminal to your personal account via Ivideon Bridge. To connect the terminal to Bridge please choose Hikvision / DS-K* as manufacturer / model. 

c9d37879d630d5815ea08f739838d7f7.png

After you connect the first terminal to the personal account, the system automatically creates a list named “PACs”. All of your terminals will automatically be added to this list. Please note that you can't add other IP cameras to this list, whereas a face terminal can't be connected to other lists.

00c92543332789ec99226526e4f2d6f4.png


NB! The name and color of PACs list can't be changed.

NB! You can set up only Push- and Telegram-notifications for PACs listsSound notifications in web-browser can`t be enabled for PACs lists. 

Open the Settings page to find the new button PACS SYNCHRONIZATION

c59c89a3bd0c9828bdc03c34b05178c3.png


If there are new face terminals on the account, which are not synchronized yet, the button will be red. There will also be a red indicator on the Settings folder. Press the button to update the list of persons.

6dc7ec5ace3ee74b7cd4c711aca960a4.png

Please note that all the face recognition settings are made on the web interface of the device, they are not available in the personal account. You can synchronize the plate`s settings with the personal account by pressing the Settings button.

72c9581370b14d5eeb500b2315fb22d9.png

NB! There are special subscription plans for face recognition terminals.

e1ce831261246b88f35ff8aeac93378d.png


Settings via Web Interface on DS-K1T331

1. Enter the device IP address in the address bar of the web browser, and enter the device username and the password. Click Login.

2. Enter Configuration.

3. Click System tabSystem Settings. Open the Basic Information tab and check the firmware version. It should be V3.1.4 build 200910 (DS-K1T331) or V3.1.7 build 200927 (DS-K1T341AM). 

1bc5c5468e22da02a0bd590d0687d647.png

4. Click Time Settings and enter the time synchronization settings:

Server Address: pool.ntp.org

NTP Port: 123

Interval: 60

Press Save.

a6815e8b0e8b4a9c871974d14f00fd50.png

5. Click Video/Audio → Video and enter video settings:

Stream Type: Main Stream

Video Type: Video Stream

Resolution: 1920*1080

Bitrate Type: Constant

Frame Rate: 25 fps

Max. Bitrate: 2048 Kbps

Video Encoding: H.264

Press Save.

92377c20f7d6852655f79098e8c046cf.png

6. Click VCA Configuration and enable Face Anti-spoofing, choose High Profile and press Save.

cd1420345d7a151039d2ee2115a9cd62.png

7. Click Access ControlAuthentification Settings, choose Face in Authentification and check Face Picture, Name and Employee ID. Press Save.

2fe5cd4dbcbfaca356e3e0bec1a9c4a6.png



Settings via Web Interface on DS-K1T341AM


1. Enter the device IP address in the address bar of the web browser and enter the device username and the password. Click Login.

2. Enter Configuration section.

3. Click System System Settings. Open the Basic Information tab and check the firmware version. It should be V3.1.7 build 200927 (DS-K1T341AM).

e632ad4a728b3b666839fbfe76eff6fd.png

4. Click Time Settings and enter the time synchronization settings:

Server Address: pool.ntp.org

NTP Port: 123

Interval: 60

Press Save.


7142312f21be19e373f6e883efc84ff8.png

5. Click Network Basic SettingsTCP/IP and check DHCP. Choose Auto for NIC Type. Press Save.


8136da1b504bc1b0616d4a3f4e77e5cf.png

6. Click Video/Audio → Video and enter video settings:

Stream Type: Main Stream

Video Type: Video Stream

Bitrate Type: Constant

Frame Rate: 25 fps

Max. Bitrate: 2048 Kbps

Video Encoding: H.264

Press Save.


9b53f941307f57f258c566ed3788fb06.png

7. Click Smart Smart and enable Face Anti-spoofing, choose High Profile and press Save.

2c1f44f839cc075e5812808d042c1cd7.png

8. Click Access Control and choose Card or Face or Fingerprint for Authentification. Check the following:

Face Picture

Name

Enable the following:

Enable Tampering Detection

Upload Picture After Linked Capture

Save Pictures After Linked Capture

Press Save.

c0543ec248901f7aacad5f6d4c8121db.png


Was this article helpful?