Resetting NBLC-1110F-MSD, NBLC-1210F-WMSD, NBLC-1310F-WMSD, NBLC-1410F-WMSD cameras

1. Unplug the camera from the power supply and remove the SD card from the device, if inserted. If the reset procedure is done with the memory card in the camera, the data from the card will be formatted;

2. Plug the camera back into the power supply and wait for the camera system to boot (approx. 30 seconds);

3. Press the Reset button (located on the back panel of the camera near the Ethernet cable port), hold it for about 15 seconds until the light indication changes, then release it and wait for the camera system to reboot (approx. 30 seconds). The indicator on the front of the camera should blink several times and light up red;

4. Unplug the camera from the power supply, insert the memory card (if used) and plug the camera back in.